Tiếng Việt
Nội dung
Steps for servicing and changing your scooter gear oil
Step 1: Prepare the necessary tools
Before you start the gear oil change, get the tools and materials you will need ready:
- A flashlight or work lamp, if needed
- Tools for loosening and removing parts, such as screwdrivers and wrenches
- A bottle of new gear oil
- A new oil filter
Step 2: Check for water in the gearbox
Before you change the gear oil on your scooter, check whether any water has gotten into the gearbox. If your scooter has been flooded or water has worked its way into the gearbox during the rainy season, change the gear oil right away to prevent damage and avoid shortening the life of the gearbox.
Step 3: Remove the gearbox
To change the scooter gear oil, you need to take the gearbox apart. Before you do this, make sure the scooter is set up on a raised platform or that the rear wheel is firmly secured, so the bike does not move while you are working on the gearbox.
Step 4: Drain the old gear oil
Once the gearbox is open, wipe the inside clean and clear out any old oil residue. Then place a container underneath and open the gearbox oil cap to let the old oil drain out.
Step 5: Replace the oil filter
After all the old oil has drained, replace the oil filter. Remove the old filter and fit a new one in its place. A new filter helps keep dirt and other particles out of the fresh oil and stops them from getting into the gearbox.
Step 6: Add the new oil
With the new filter in place, pour the fresh oil into the gearbox. Use a purpose-made gear oil with stable, reliable performance characteristics. A trusted brand and good oil quality are just as important for keeping the gearbox running well.
Step 7: Check the oil level
After adding the new oil, check the level. Make sure it is neither too high nor too low. Too much oil can create excess pressure and damage the gearbox, while too little oil leads to friction and gear wear.
Step 8: Reassemble the gearbox
Once the gear oil is in and the level is correct, put the gearbox back together and refit any covers that protect it from dust, sand, and water.
Step 9: Check that everything works
With the gearbox reassembled, check how the scooter runs. Take it out for a short ride to confirm the gearbox operates smoothly and there are no unusual noises or behavior.
Choosing the right scooter gear oil
When choosing a gear oil for your scooter, pay attention to a few key factors: a trusted brand, good quality, and the oil’s performance characteristics. A purpose-made gear oil with stable, reliable properties will protect the gearbox and help keep your scooter running well.
Conclusion
Servicing and changing your scooter gear oil the right way is an important part of keeping your scooter quiet, smooth, and long-lasting. In this article we have gone through each step of maintaining and changing the gear oil fully and accurately. Stay on top of regular gear oil changes and choose the right oil to protect the gearbox and keep your scooter performing at its best.
XADO VIETNAM
Address: 2nd Floor, VinFast Building – D1, 135–139 Dong Van Cong Street, Cat Lai Ward, Ho Chi Minh City
Website: www.xadovietnam.vn
Dealership inquiries: 028 77777 369
Email: kinhdoanh@songdailong.com
