XADO REVITALIZANT EX120 for cylinders is engineered to restore, repair, and protect an engine’s cylinder-piston group against wear, with no need to tear the engine down.

The product is designed to restore, repair, and protect the engine’s cylinder-piston group against wear, without any teardown required.
It forms a metal-ceramic coating on the surfaces of the cylinder-piston components. Engine surfaces are restored, the size of their wear patches is reduced, and wear disappears.

ADVANTAGES of XADO REVITALIZANT EX120 for cylinder restoration

Boosts cylinder compression
Removes scratches and scoring marks of up to 0.1 mm
Protects cylinders from wear during cold starts
Reduces engine noise and vibration
Increases engine power
Lowers fuel consumption
Reduces CO and HC in the exhaust
Can restore one or several cylinders

DIRECTIONS FOR USE

For use in the cylinders of petrol engines.
Run the engine for a few minutes.
Remove the spark plug, then disconnect the central cable of the ignition coil and the switch.
Empty the entire contents of the tube into the cylinder.
Move the piston through 15–20 strokes (by cranking the engine, turning the wheel, etc.).
Refit the spark plug and crank the engine 3–4 times, each crank lasting 3–4 seconds, with 20-second intervals between them.
Reconnect the central cable and the switch. Let the engine idle for 15 minutes.
Drive the vehicle as normal.

DOSAGE

One tube per cylinder.
Apply the gel to the cylinder walls, not onto the piston. You can use one syringe together with another to dissolve the tube’s contents in 5–10 ml of engine oil. To avoid hydraulic shock (hydrolock), keep the total amount of liquid under 20 ml.

XADO VIETNAM

Address: 2nd Floor, VinFast Building – D1, 135–139 Dong Van Cong Street, Cat Lai Ward, Ho Chi Minh City
Website: www.xadovietnam.vn
Dealership inquiries: 028 77777 369
Email: kinhdoanh@songdailong.com